CAFFEINE POWDER 100% Anhydrous Pharma Grade (MANUFACTURING PURPOSES ONLY – NOT for personal or home use)

Name: CAFFEINE POWDER 100% Anhydrous Pharma Grade (MANUFACTURING PURPOSES ONLY - NOT for personal or home use)
SKU: CAFF
Availability: InStock

$88.00 – $2,400.00

Please see below, full description, specifications, warnings and directions for use.

Beware of cheap, low grade imports.

Size:

Clear

CAFFEINE POWDER 100% Anhydrous Pharma Grade (MANUFACTURING PURPOSES ONLY – NOT for personal or home use)

Description
Additional information

CAFFEINE POWDER 100%

Anhydrous Pharma Grade

(MANUFACTURING PURPOSES ONLY)

Please Note: This Product is NOT for personal or home-use

Pure caffeine powder – silky white crystalline powder. Free shipping Australia-wide.

DESCRIPTION

Caffeine is classified by the US Food and Drug Administration as generally recognised as safe (GRAS). Toxic doses, over 10 grams per day for an adult, are much higher than the typical dose of under 500 milligrams per day, A cup of coffee contains 80–175 mg of caffeine, depending on what “bean” (seed) is used and how it is prepared (e.g., drip, percolation, or espresso). Thus it requires roughly 50–100 ordinary cups of coffee to reach the toxic dose. However, pure powdered caffeine, which is available as a dietary supplement, can be lethal in tablespoon-sized amounts.

Suggested Use: An average cup of coffee contains approximately 100mg of caffeine – use this product accordingly.

Storage: Store in a cool dry place. Keep away from strong light and heat.

Caution: This product is PURE CAFFEINE – care must be taken as small amounts can be very potent. Using a micro weighing-balance of high accuracy, is strongly recommended. Avoid prolonged exposure to skin. Do not inhale, and avoid contact with mucous membranes and eyes.

WARNINGS: Keep out of the reach of young children. Do not exceed the recommended daily dose. Food supplements should not be used as a substitute for a varied and balanced diet. Do not take during pregnancy or for prolonged periods without consulting a doctor.

MANUFACTURING PURPOSES ONLY

Please Note: This Product is NOT for personal or home-use

Content	Standard	Results
Appearance	White or almost white, crystalline powder (BP) or silky, white or almost white, crystals	White crystalline powder
Identification A. Melting point B. Infrared Absorption C. Loss on drying	234-239^oC (BP) Conforms to the caffeine reference spectrum (BP) See Tests (BP)	236.2-237.0^oC Pass Pass
Appearance on solution	Clear, colourless (BP)	Pass
Heavy metals	≤20ppm (BP)	<10ppm
Sulphates	≤500ppm (BP)	<500ppm
Related substances
Each impurity A, B ,C, D,E, F	≤0.10% (BP)	<0.10%
Unspecified impurities	≤0.10% (BP)	<0.10%
Total impurities	≤0.1% (BP)	<0.1%
Acidity	Not more than 0.2 ml of 0.01M sodium hydroxide (BP)	<0.2ml
Organic impurities
Individual impurities	≤0.1% (USP)	<0.1%
Total impurities	≤0.1% (USP)	<0.1%
Loss on drying	≤0.5% (BP)	0.10%
Residue on ignition	≤0.1% (USP)	0.05%
Assay	98.5%-101.0% (USP)	99.8%

Conclusion: The above product conforms to BP2015, USP38 requirement on Caffeine.

DISCLAIMER

Before Use: Customers should always refer to the most current Material Safety Data Sheet (MSDS), Specification Sheet, or the product’s ingredients label, which will be provided on request, at the time of delivery or available on our website.

The information shared is intended solely for educational purposes. Recipients should independently assess whether the details are suitable for their specific applications or intended uses.

As Labsupply Australia Pty Ltd. has no control over how products are used, no warranties or representations, either expressed or implied, are made regarding the effects of their use (including potential damage or injury) or the results obtained. Labsupply Australia Pty Ltd. disclaims any responsibility for the product’s use outside of its intended purpose. Additionally, this information should not be construed as a recommendation for any specific use. The company’s liability is limited to the value of the goods supplied and does not cover any consequential losses.

Labsupply Australia Pty Ltd. will not be responsible for errors or delays in the content, nor for any actions taken based on this information.

Labsupply Australia Pty Ltd. is not liable for any damages resulting from the use or reliance on the information provided.

The user is fully responsible for ensuring that all applicable laws and regulations are followed in the use of the products, including respecting the intellectual property rights of third parties.

The images and representations of products on this website are as accurate as possible, given the limitations of photography and printing. These images are for illustrative purposes only. If you have questions about product packaging or labelling, please reach out to your account manager at our Condell Park Head Office.

Labsupply Australia Pty Ltd. operates as a wholesale supplier of laboratory, pharmaceutical and chemical products and raw materials. If you intend to re-label any of our products for resale or retail, we strongly advise you to stay informed about current labelling laws. For more information, visit www.accc.gov.au or www.nicnas.gov.au. Labsupply Australia Pty Ltd. is not responsible for any product recalls or losses resulting from improper labeling.

Note: Recipients of any information provided through this website should apply their own judgment in determining its suitability for any particular purpose or use. Labsupply encourages conducting small-scale trials before embarking on full-scale production.